Hey Muddy Colors! Just as a heads up, and for context: many of my articles here are taken from my Patreon, where I publish a couple posts per month. OK; enjoy!
Sunday Skills: weekly, informal articles on trying to get better by examining all the little stuff (which invariably reveals itself to be the big stuff).
I’d like this column to be both as interactive and as helpful as possible so please DO leave comments if you feel the urge; I’ll be checking and replying to everything. I was super excited to get a couple of great art book recommendations (and some convenient links to hard-to-find online resources ) in the comments to last week’s article – thank you to everyone who contributed!
“Seeing Wide” is a method of strategizing where and how you look at your drawing surface to maximize control and minimize errors. Yes, it’s as great as it sounds. It took me an embarrassingly long time to find out about this type of seeing. That’s why, though perhaps many of you will already be familiar with this technique, I wanted to describe it in detail here.
For several years when I thought about drawing I focused entirely on what happened on the drawing surface, and very little on what happened inside me – it never even occurred to me to think about strategizing how I’d use my own eyeballs. Mistakes like this (seeing in the wrong way) can be tough to detect on our own, because they don’t manifest on the actual work surface, and because we’re not in the habit of questioning our most basic assumptions. Here’s the question that opens up this conversation: “where do you look while you’re making a mark with your brush or pencil?”
Now right about here, most people will look at me like I’m dumb for a long minute. I usually break the silence and ask: “Are you looking at ‘where the line comes out?’ Are you looking at the tip of your pencil or brush, where it meets the page?” Generally they say “yes,” with the head nod that accompanies the internal “obviously, dude.” Let’s call this type of looking (looking at where the mark happens) “Seeing Small.”
In my interviewing of expert artists I’ve found that they do it much, much differently. They See Wide, and generally the better they are, the wider they see. Let’s look at the simplest possible example to understand what they’re doing:
OK, let’s assume this is what’s on our page, the drawing as it stands. Beautiful, no? I’m getting a real “dangerous but sexy” vibe from the cube. To enhance that, maybe we want to add a slightly curving line off to the left, so that the page will end up looking like this:
For Seeing Small we leverage our eyeball’s natural inclination toward predatory focus, honing in tightly on one thing. Notice that “area of focus” and “area of vision” are NOT the same thing. I’m using solid red to indicate where your attention is concentrated. Usually we can physically “see” much more than we’re paying attention to.
When we’re Seeing Small and we go to make the mark; this is what our focus will look like:
When we draw this way, notice that our awareness is riding right along with the mark itself as it gets created. Notice also that the mark has come out more curved than we meant for it to. Why should that be so? Firstly, as a good general rule for artists: nothing is ever as curved as it seems, so always intentionally hold back while drawing curves. Or better yet, break them into a couple of smoother, straighter lines (academic draftsmen call these ‘facets’). More to the point, this line came out too curvy because we spent the whole time comparing the mark to itself. This mark is the only thing we’re focusing on! We kept feeling like it needed “more curve” because we were comparing it to an already curving thing. Our general area of focus doesn’t take the cube into consideration at all, even though we only need the line to feel slightly curved in relation to the cube. This is how you end up in the infinite “line, Ctrl+Z, line, Ctrl+Z” loop, where the mark never seems right, until it does but you already hit Ctrl+Z and made a new mark. Crap. Let’s fix that by doing the mark while Seeing Wide instead. First, we need to update our key:
When Seeing Wide, we take advantage of our peripheral vision, and combine it with our focused vision to create a “general area of focus” surrounding a loosely-held “center of focus.” It sounds complicated in words, but it’s not in actuality. So how do we get there?
The simplest way is to sit down with a good book and begin to read for a little bit. At some point, interrupt yourself mentally, and notice that you have been reading while Seeing Small – taking each word one at a time, alone. This is good for immersive reading experiences, but shuts down our broader visual abilities. Now try this: fix your gaze (no changing your position or the direction of your eyes), and “zoom out.” For some, the trigger phrases “soften your gaze” or “use your “thousand-yard stare” are also helpful, but I’ve found the phrase “zoom out” to be the most broadly effective. Once we do this we realize that we can see our hands, the entire book, our lap, the floor, and part of the room all around us – a LOT more than the single words we have been paying attention to, all without moving our eyes. Now we’re starting to See Wide!
We can take it even further if we want to. At this point try to maintain the broad, zoomed-out vision you’ve established while relocating your place on the page (creating a center of focus). Once this is accomplished successfully, you should be able to continue reading the page while staying aware of your surroundings. It’s taxing, and usually quite difficult at first; it seems to take a bit of extra concentration. Some of you will have prior training or experiences that make this feel more natural. Others, like myself, will have to work on it over time. When I first encountered this type of seeing I was only able to snap into it for brief periods, but then it would elude me again for hours or days, slipping away whenever I let my concentration lapse (as it always eventually does). The goal is to get to a point where you can see this way on command, and to make almost all of your marks from this viewing position.
It sounds completely exhausting to work in this mode all the time, and it would be. Luckily, we can use it “all the time,” without always keeping it “on.” The key is a pulsing, rhythmic application of the technique. You spot the next mark that needs to be made, assess the proper fixed gaze to accomplish the mark, and begin to See Wide. Then, WITHOUT LOOKING DIRECTLY AT THE MARK, and keeping your eyes fixed in a position where they can take in all the relevant points of comparison, make the mark. Like this:
The dot is where my vision was centered – on nothing. To make this particular blue mark I fixed my gaze in such a way as to keep the mark on the left of my peripheral vision, and the cube on the far right. I am effectively looking at both without looking at either. I am making the mark in relation to the whole image.
Once the mark is made you can relax your vision while you consider the painting and spot the next mark to be made. In and out, rhythmically, you can leverage this ability at the exact moment of mark-making, over and over. It takes a bit of practice to get into the habit, but it is well worth it because when you’re seeing and thinking this way marks just seem to come out “right.” Seriously; it’s really weird. Once the habit is developed you’ll always have it with you, operating flawlessly underneath the marks.
There are a few manual equivalents that force this type of broad seeing, though they’re not as powerful as knowing the internal mechanism. In Photoshop, where this type of seeing is easiest because the painting can never get all that big, you can paint with the Navigator window open to always be seeing the painting small. Also, don’t zoom in. Seriously; stop that.
In the physical world of painting, this is the reason many of the best paint at arm’s length, or step back in between strokes: to give their eyes room to see properly, widely. Sargent is said to have taken this idea so far as to have stepped back twenty steps between each mark to judge the painting as a whole.
It may seem like you won’t have very much control over the mark if you never look at it, and if you paint or draw from such a distance. Great! Control of our marks is overrated. Richard Schmid wrote in Alla Prima that “…the simple act of writing your name requires far more manual dexterity than anything needed in painting.” This is what he meant. Great painting and drawing doesn’t require precise marks; it requires marks to be in precise relationships. And this type of seeing is how you make sure you’re always judging relationships. If you make a paint mark, don’t edit it! Judge it against the focal point of the painting while seeing wide. You will find that almost any mark will do.
So Seeing Wide protects you from fiddling (which is what makes painters slow), and from focusing on the wrong things. It destroys the feeling of preciousness about the work, and opens up the realm of virtuoso mark-making. Additionally, Seeing Wide can protect you from making errors in proportion. Simply fix your gaze to the full length of the drawing that will come to exist, and begin to draw. If you never look at any area too specifically, those areas can’t balloon out of proportion. While Seeing Wide you have full access to the perspective cues in your image even while drawing, so you’ll stop drawing areas that are “out of perspective.”
Of course, all this rests on the assumption that you have a passable familiarity with your mark-making tools, and that they’re not doing anything to sabotage you while you’re busy not looking at them. But this has already been a lot to cover, so we’ll talk about all THAT next week.
For those who enjoyed this: I’m currently sharing a few posts per month on Patreon, centered around the development of the illustrator, and exploring the world of illustration from behind the curtain.